To resolve the ATTEMPTED WRITE TO READONLY MEMORY BSOD error, check the system for over clocking. You can disable all Overclocking or use a lower setting based on the clock frequency specified by the manufacturer of the CPU, GPU, and other installed devices. You can also resolve this issue by employing the Last Known Good Configuration feature that allows you to start the computer by employing the latest settings and configurations that worked.
To check if the error is caused by a faulty drive, run an automatic driver update or manually update the drivers to the latest available versions.
To manually update a driver, follow these steps:
Click Start Type in devmgmt.msc in the search box Click devmgmt from results list Right-click on the driver To update the driver, select Update Driver Software. To disable the driver, select Disable. To uninstall the driver, select Uninstall.
To run an automatic driver update, follow these steps:
Click Start Go to Devices and Printers Right-click on your computer Select Device Installation Settings Select Yes, do this automatically Click Save Changes